wandmaker
10-20 04:36 PM
I'm going to meet the lawyer to see what is the option here. But what is the best thing to do ...go back to India and get the H4 or apply the cos from h1->H4 from here?
What did your lawyer say?
Anyone guys...?
I've to decide fast what to do....get the H4 stamped from India or do the COS from US. If we go to India and get the H4 stamping there is a chance that the consulate people might ask about H1 and if they found that my wife was out of status they might bar her from entering US.
let me know if anyone has the same case or gone through this.
Thanks
it is up to you decide, which side of the double edged sword you want to hold onto.
What did your lawyer say?
Anyone guys...?
I've to decide fast what to do....get the H4 stamped from India or do the COS from US. If we go to India and get the H4 stamping there is a chance that the consulate people might ask about H1 and if they found that my wife was out of status they might bar her from entering US.
let me know if anyone has the same case or gone through this.
Thanks
it is up to you decide, which side of the double edged sword you want to hold onto.
wallpaper hairstyle for women
cygent
04-10 09:36 PM
Welcome to Hell brother... Hahahaha ;-) Chill
You can't be serious. Get up on your 2 feet, you are lucky you have IV now, Back in the day, we never had any support.
Be Proactive & prepare for the worst. That's the best advice, gleaned from experience, the best teacher.
Hi,
I got my H1 in 2004 thru an body shopper. I completed my first three year period. got next 3 yr extension recently. when would be right time to apply GC? what category is suggested EB2/EB3?
How long will it take to clear labour?
Thanks for valuable suggestions
You can't be serious. Get up on your 2 feet, you are lucky you have IV now, Back in the day, we never had any support.
Be Proactive & prepare for the worst. That's the best advice, gleaned from experience, the best teacher.
Hi,
I got my H1 in 2004 thru an body shopper. I completed my first three year period. got next 3 yr extension recently. when would be right time to apply GC? what category is suggested EB2/EB3?
How long will it take to clear labour?
Thanks for valuable suggestions
Aah_GC
08-17 06:34 PM
Titles do matter as they are the first ones to catch the eye. To me it appears you are moving from a PM position to a tech specialist position (at least on paper) and you might have some problems there. If possible, try to request for a title with "manager" in it. If that is impossible, try to go by matching SOC code. Does your prospective employer have a legal immigration team to help out?
2011 emo layered hairstyles. emo
pani_6
08-17 04:01 PM
Why not FedEx?
fedex des not deliver to PO boxes
fedex des not deliver to PO boxes
more...
aardee
08-20 02:50 PM
Hi ,
I got deported from Chicago when I was travelling back from India because I worked at a gas station with out authorization . I had to admit that I worked and I was deported back by flight same evening . They gave me the ticket .
My visa is cancelled and I was told to go back to consulate and get a new visa .
I want to come back and complete my studies as I have only 1 semester left . Please help what what should I do now .
thanks in advance.
RD
I got deported from Chicago when I was travelling back from India because I worked at a gas station with out authorization . I had to admit that I worked and I was deported back by flight same evening . They gave me the ticket .
My visa is cancelled and I was told to go back to consulate and get a new visa .
I want to come back and complete my studies as I have only 1 semester left . Please help what what should I do now .
thanks in advance.
RD
Project_A
11-15 10:40 AM
Here is the latest snapshot of the backlog of EB applications:
EB1= 7,595 + 2,961 ( at NVC) + new applications.
EB2= 45,573 + 6,738 ( at NVC) + Huge backlog waiting in line.
EB3= 114,442 + 102,395 ( at NVC) + unknown backlog waiting in line.
*NVC stands for National Visa Center.
** Does not include service centers.
* Spillover to EB3 may not happen for several years due to a large number of EB2's waiting to submit their 485 applications.
* Even if spillover occurs, majority of them will go to EB3 Philippines (please See the NVC backlog).
* From the above, assuming no spillover to EB3-I, it would take (56,640 + 20,873)/2600=30 years.
* With spillover (lets say after 5++ years due to the pending EB2�s), it may take another 5 to 7 years to clear the EB3 backlog.
EB1= 7,595 + 2,961 ( at NVC) + new applications.
EB2= 45,573 + 6,738 ( at NVC) + Huge backlog waiting in line.
EB3= 114,442 + 102,395 ( at NVC) + unknown backlog waiting in line.
*NVC stands for National Visa Center.
** Does not include service centers.
* Spillover to EB3 may not happen for several years due to a large number of EB2's waiting to submit their 485 applications.
* Even if spillover occurs, majority of them will go to EB3 Philippines (please See the NVC backlog).
* From the above, assuming no spillover to EB3-I, it would take (56,640 + 20,873)/2600=30 years.
* With spillover (lets say after 5++ years due to the pending EB2�s), it may take another 5 to 7 years to clear the EB3 backlog.
more...
indianindian2006
07-11 05:52 PM
What is LUD?
Last updated date
Last updated date
2010 Trend Short Bob Emo Haircut
dc2007
07-25 10:55 AM
I didn't find what I am looking for.
I already have a lawyer and the ONLY reason I want to file myself is because I am fed up in chasing lawyers, my company etc. They don't respond in time and anyways I am preparing all my documents my self and guiding lawyer also.
So, I am thinking to file myself.
I already have a lawyer and the ONLY reason I want to file myself is because I am fed up in chasing lawyers, my company etc. They don't respond in time and anyways I am preparing all my documents my self and guiding lawyer also.
So, I am thinking to file myself.
more...
gckalafda
03-20 11:46 AM
RoseBall,, here is my query..Please answer
I got RFE on 140 asking
all my expereince letter proir to 2002 ( I came US in 1999) and By the time I worked with two companys.
Now I got one company exp letter and other one closed and I couldn't able to get the letter. as per sources and attorney advice I am submitting coleague affidavit.
and also they asked me all w2's where I worked only few months in 2004 and w2 amount is not that great.
I am still fearing how do USCIS take in to consideration when they finalise the case.
Do you think all these are substantiate my case , or they may come with another RFE or denial..
Please advise me what I want to do, I haven't submitt my case yet.
Thanks
I got RFE on 140 asking
all my expereince letter proir to 2002 ( I came US in 1999) and By the time I worked with two companys.
Now I got one company exp letter and other one closed and I couldn't able to get the letter. as per sources and attorney advice I am submitting coleague affidavit.
and also they asked me all w2's where I worked only few months in 2004 and w2 amount is not that great.
I am still fearing how do USCIS take in to consideration when they finalise the case.
Do you think all these are substantiate my case , or they may come with another RFE or denial..
Please advise me what I want to do, I haven't submitt my case yet.
Thanks
hair Asian Hairstyle
hiralal
06-18 09:56 PM
if your wife is bugging you to buy a house ...show them this article :D :D ..and it will help
-------------------------------
Female Homeowners Sadder, Fatter Than Renters
John Carney|Jun. 18, 2009, 11:27 AM|comment27
Print
Tags: Economy, Housing, Housing Crisis
Researchers from Wharton have discovered that female homeowners, on average, outweighed renters by 12 pounds.
Female homeowners were also carrying around more aggravation, making less time for leisure, and were less likely to spend time with friends.
"Home ownership can be a much more complex idea than just a straightforward expression of what we call the American dream," says Grace Wong Bucchianeri, an assistant professor of real estate at the University of Pennsylvania's Wharton School. The story was reported on Canada.com
But what about all the good stuff that comes with owning a home? Aren't homeowners benefiting from the security and independence of owning. Not really. The research shows that when you control for things like childbirth and income, the difference in contentment vanishes.
"I don't see any strong evidence that homeowners are any happier than renters," says Bucchianeri, whose 600-woman study is under review for publication in the Journal of Urban Economics. "On the other hand, they consistently report a higher level of pain — or what you might call negative feelings — connected to their home, and that's after controlling for all kinds of demographic characteristics, their financial situation, how many children they have and so on."
-------------------------------
Female Homeowners Sadder, Fatter Than Renters
John Carney|Jun. 18, 2009, 11:27 AM|comment27
Tags: Economy, Housing, Housing Crisis
Researchers from Wharton have discovered that female homeowners, on average, outweighed renters by 12 pounds.
Female homeowners were also carrying around more aggravation, making less time for leisure, and were less likely to spend time with friends.
"Home ownership can be a much more complex idea than just a straightforward expression of what we call the American dream," says Grace Wong Bucchianeri, an assistant professor of real estate at the University of Pennsylvania's Wharton School. The story was reported on Canada.com
But what about all the good stuff that comes with owning a home? Aren't homeowners benefiting from the security and independence of owning. Not really. The research shows that when you control for things like childbirth and income, the difference in contentment vanishes.
"I don't see any strong evidence that homeowners are any happier than renters," says Bucchianeri, whose 600-woman study is under review for publication in the Journal of Urban Economics. "On the other hand, they consistently report a higher level of pain — or what you might call negative feelings — connected to their home, and that's after controlling for all kinds of demographic characteristics, their financial situation, how many children they have and so on."
more...
gcformeornot
08-07 09:23 AM
sometimes, labor subs can be genuine cases as well....
Please
Please
hot hairstyles Long black layered
gc_on_demand
06-02 07:04 PM
This message has been corrected.
Shouldnt the title include petitions filed by one particular law firm:
'Fragomen, Del Rey, Bernsen & Loewy LLP' ??
(its a little misleading & intimidating to know 'ALL' applications)
Shouldnt the title include petitions filed by one particular law firm:
'Fragomen, Del Rey, Bernsen & Loewy LLP' ??
(its a little misleading & intimidating to know 'ALL' applications)
more...
house dresses hair Long Layered Emo
Immigstories
01-11 01:32 PM
Gurus
I need some guidance on my situation here: I am currently working on an H1B visa in the US. I was working for company A since Oct '06 and recently moved to Company B in December '07. I have an unexpired H1 visa stamped (associated with Company A) in my passport now. Company B promptly applied and I have the H1 Petition Receipt number (receipt date Dec 3 2007), and as of Jan 11 '08, the case is pending.
I need to travel to India on March 1st and returning on March 23rd. As my H1 petition with Company B is in a pending status, what are my options with regards to H1 visa stamping requirements when I need to re-enter the country on March 23rd '08:
1. Not get a new H1 visa stamp on the passport and travel with the Company A's H1 visa stamp. Is it safe attempting to re-enter the country with the H1 visa stamp from the previous employer? In that case, can I show them the old I797 and explain to the POE officer that I am currently working for a different employer and show them the new receipt notice and letter from the new employer? What if the new H1 Petition is approved a week before my travel date to India or when I am in India?
2. Make the new H1 petition with Company B, premium and obtain an approval. Travel to India with the new I797 with either a visa stamp from canada/mexico consulate or stamping from consulate in India. I would like to avoid this option, if legally permitted, as I may not have the time in India to go for stamping.
I apologize for the long-winded question here, and I greatly appreciate any suggestions or comments you may have. I browsed thru most of the threads in this forum, but did not answers to my specific questions.
Thanks
I need some guidance on my situation here: I am currently working on an H1B visa in the US. I was working for company A since Oct '06 and recently moved to Company B in December '07. I have an unexpired H1 visa stamped (associated with Company A) in my passport now. Company B promptly applied and I have the H1 Petition Receipt number (receipt date Dec 3 2007), and as of Jan 11 '08, the case is pending.
I need to travel to India on March 1st and returning on March 23rd. As my H1 petition with Company B is in a pending status, what are my options with regards to H1 visa stamping requirements when I need to re-enter the country on March 23rd '08:
1. Not get a new H1 visa stamp on the passport and travel with the Company A's H1 visa stamp. Is it safe attempting to re-enter the country with the H1 visa stamp from the previous employer? In that case, can I show them the old I797 and explain to the POE officer that I am currently working for a different employer and show them the new receipt notice and letter from the new employer? What if the new H1 Petition is approved a week before my travel date to India or when I am in India?
2. Make the new H1 petition with Company B, premium and obtain an approval. Travel to India with the new I797 with either a visa stamp from canada/mexico consulate or stamping from consulate in India. I would like to avoid this option, if legally permitted, as I may not have the time in India to go for stamping.
I apologize for the long-winded question here, and I greatly appreciate any suggestions or comments you may have. I browsed thru most of the threads in this forum, but did not answers to my specific questions.
Thanks
tattoo 2011 Emo Haircuts
paragpujara
10-15 12:03 PM
DMVs in VA and MD check immigration status to issue/renew DL.
I renewed mine 3 months ago. Texas is a LIBERAL state after all.
Can anybody list the states that check immigration status to renew / issue a driver's license?
I renewed mine 3 months ago. Texas is a LIBERAL state after all.
Can anybody list the states that check immigration status to renew / issue a driver's license?
more...
pictures Long Layered EMO Hairstyles
dsneyog
01-15 09:26 AM
EXPEDITE PLEASE
PREPAID ENVELOPE ENCLOSED
Your Name
Your Address
I-485 Receipt Number: xxx-xx-xxx-xxxx
December 1st, 2009
To:
USCIS
Texas Service Center
P.O. Box 851182
Mesquite, TX 75185-1182
Subject: Application for Advance Parole Travel Document (I-131) for Firstname Lastname A# xxx-xx-xxxx
Dear Sir/Madam,
I need a travel document as I am planning to travel outside the united states in late February 2010. I am eligible for travel document based on my pending adjustment of Status (I-485) application, Receipt # SRC-xx-xxx-xxxxx.
I am enclosing the following supporting documents:
1. Check in the amount of $305, payable to U.S. Department of Homeland Security
2. Form I-131, Application for Travel Document
3. 2 Identical photographs (Name and A# written on the back of photos)
4. Copy of current passport (All pages)
5. Copy of expired passport (All Pages)
6. Copy of Form I-94 (Front and back)
7. Copy of a I-797C, ASC Appointment Notice
8. Copy of a I-797C, Receipt Notice for I-485
9. Copy of a I-797C, Approval Notice for I-140
10. Copy of a I-797C, Receipt Notice for I-140
11. Copy of EAD
12. Copy of Driver's License
13. Copy of Marriage Certificate
14. Prepaid self addressed envelope with delivery confirmation for USCIS to send my I-131 approval.
Please approve my application for Advance Parole.
Thank you in advance for your kind attention and cooperation in this matter.
Yours Truly,
PREPAID ENVELOPE ENCLOSED
Your Name
Your Address
I-485 Receipt Number: xxx-xx-xxx-xxxx
December 1st, 2009
To:
USCIS
Texas Service Center
P.O. Box 851182
Mesquite, TX 75185-1182
Subject: Application for Advance Parole Travel Document (I-131) for Firstname Lastname A# xxx-xx-xxxx
Dear Sir/Madam,
I need a travel document as I am planning to travel outside the united states in late February 2010. I am eligible for travel document based on my pending adjustment of Status (I-485) application, Receipt # SRC-xx-xxx-xxxxx.
I am enclosing the following supporting documents:
1. Check in the amount of $305, payable to U.S. Department of Homeland Security
2. Form I-131, Application for Travel Document
3. 2 Identical photographs (Name and A# written on the back of photos)
4. Copy of current passport (All pages)
5. Copy of expired passport (All Pages)
6. Copy of Form I-94 (Front and back)
7. Copy of a I-797C, ASC Appointment Notice
8. Copy of a I-797C, Receipt Notice for I-485
9. Copy of a I-797C, Approval Notice for I-140
10. Copy of a I-797C, Receipt Notice for I-140
11. Copy of EAD
12. Copy of Driver's License
13. Copy of Marriage Certificate
14. Prepaid self addressed envelope with delivery confirmation for USCIS to send my I-131 approval.
Please approve my application for Advance Parole.
Thank you in advance for your kind attention and cooperation in this matter.
Yours Truly,
dresses brown emo hairstyles.
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
more...
makeup long layered emo hairstyles.
alterego
03-16 10:43 AM
I am not sure why folks make such a big deal about this. Just because one or two people had a nasty experience with an officer does not mean traveling on a valid AP document is a significant risk. For that matter if you try to reenter on H1b you could have problems. I have reentered the US on about 10-12 occasions over the years. On J1, On H1, On AP. Funny enough my worst experience was on H1b (that too just a mean officer demanding my petition documents..........not sure what he meant to this day) anyway.
So the moral of the story is that travel out of the USA always involves a small element of risk, but that should not deter one from living their life.
As for the people who move on and work for another employer using A21, here too you are within the law, and if you are worried about it you can keep a copy of AC21 or a letter from your lawyer and your current employer along with your paystubs and your approved labor/140/filed 485 with you. Of course, you never present all that to the officer unless asked. And be polite and courteous, remember it is a privilege to enter this country, once we are citizens it will become our right.
Interestingly, one time when I mentioned that I reside in Michigan, the officer corrected me to say I was staying there and could use reside once my 485 was approved. To me it was semantics, but hey..........
Life is too short for stressing over things like this. You were granted AP for a reason.............to travel, unless something untoward happens with your 485 during this time(unlikely) not much is likely to go wrong at entry.
Happy travels folks, quit worrying so much and live your lives.
So the moral of the story is that travel out of the USA always involves a small element of risk, but that should not deter one from living their life.
As for the people who move on and work for another employer using A21, here too you are within the law, and if you are worried about it you can keep a copy of AC21 or a letter from your lawyer and your current employer along with your paystubs and your approved labor/140/filed 485 with you. Of course, you never present all that to the officer unless asked. And be polite and courteous, remember it is a privilege to enter this country, once we are citizens it will become our right.
Interestingly, one time when I mentioned that I reside in Michigan, the officer corrected me to say I was staying there and could use reside once my 485 was approved. To me it was semantics, but hey..........
Life is too short for stressing over things like this. You were granted AP for a reason.............to travel, unless something untoward happens with your 485 during this time(unlikely) not much is likely to go wrong at entry.
Happy travels folks, quit worrying so much and live your lives.
girlfriend Emo Haircuts For Girls With
CantLeaveAmerica
07-21 05:17 PM
My wife and I received a similar RFE in yesterday's mail. It seems they do not have our form I-693 in their possession. Wonder why they took 2 years to figure that out though we had submitted all documents in its entirety at that time. Anyways, we will be redoing the medicals and sending them the form..an additional $500 for both of us!
Back to your question, YES, we did both receive a letter for the RFE along with a yellow(gold) paper with the officer #, receipt #, reply by date (33 days if received by post), A# and the address for the sealed envelope from doctor to be sent to printed on it. The yellow letter has to be placed on the top. Btw, the officer # was same for both mine and my wife's cases.
Please note that in the last paragraph, this is what it states: "You must submit the requested information within 30 days from the date of this letter (33 days if this notice was received by mail). Failure to do so may result in the denial of your application."
Does this mean that there are some folks that may receive the RFE through email only and therefore will not receive the yellow(gold) paper in the regular mail? I dont know...
Hope this info helps...
Back to your question, YES, we did both receive a letter for the RFE along with a yellow(gold) paper with the officer #, receipt #, reply by date (33 days if received by post), A# and the address for the sealed envelope from doctor to be sent to printed on it. The yellow letter has to be placed on the top. Btw, the officer # was same for both mine and my wife's cases.
Please note that in the last paragraph, this is what it states: "You must submit the requested information within 30 days from the date of this letter (33 days if this notice was received by mail). Failure to do so may result in the denial of your application."
Does this mean that there are some folks that may receive the RFE through email only and therefore will not receive the yellow(gold) paper in the regular mail? I dont know...
Hope this info helps...
hairstyles Long layered emo hairstyles
whitecollarslave
01-23 01:37 PM
$1000 is a lot for Premium Processing and VSC is profiting a lot from this. They are running a business for sure....
Its only extensions which are a long time.
USCIS is self-funded from application fees. They don't get any other funding as far as I know. So, sure they are running a business.
I know its not cheap, but atleast there is a way. I have been in this long enough to know times when it took a long time without an option of premium processing.
You can always make your employer pay for the fees.
Its only extensions which are a long time.
USCIS is self-funded from application fees. They don't get any other funding as far as I know. So, sure they are running a business.
I know its not cheap, but atleast there is a way. I have been in this long enough to know times when it took a long time without an option of premium processing.
You can always make your employer pay for the fees.
Nw2GC
05-07 08:32 PM
I will be submitting my paper work soon!
willwin
03-16 02:06 PM
Bump... please, if anyone got PW for greencard labor through the new process... how long it took??
Anyone?
Mine was filed 1st week of Jan and still waiting .....
Anyone?
Mine was filed 1st week of Jan and still waiting .....
No comments:
Post a Comment