vandanaverdia
09-10 12:31 PM
I think it is a good idea to have T-shirts made available in DC too. This will make it easier for people who haven't had the chance/time to order online, buy them in DC itself. Any thoughts????
wallpaper The 1968 Firebird was named #9
MatsP
November 9th, 2004, 09:41 AM
Sorry to hear about your problem with the D70...
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
tikka
06-25 12:49 PM
IV members have saved all of us a lot of money on attorney phone calls, getting answers to medical test questions and other general questions. Please contribute to IV so that we can keep this effort going. While everybody is busy collecting documents and paperwork for 485, core IV again is doing their personal paperwork and + lobbying.
Please contribute, especially if you are new and never contributed. Please do not be a freeloader and get your questions answered and run away.
Thank you
Please contribute, especially if you are new and never contributed. Please do not be a freeloader and get your questions answered and run away.
Thank you
2011 1967 Pontiac Firebird
amitjoey
11-21 04:54 PM
Similar Question:
I have not left the USA for the last 5 years. I have since extended my H1- thrice. So I have 3 new I-94's and the old one that is stapled in the passport. I-94 is taken at the airport when you depart, to record your departure and also to see if you were residing legally on a valid stay. Question: They always take the one stapled in your pasport. (That in my case shows an expired stay.) so should I give them the latest I-94 when I depart?.
I have not left the USA for the last 5 years. I have since extended my H1- thrice. So I have 3 new I-94's and the old one that is stapled in the passport. I-94 is taken at the airport when you depart, to record your departure and also to see if you were residing legally on a valid stay. Question: They always take the one stapled in your pasport. (That in my case shows an expired stay.) so should I give them the latest I-94 when I depart?.
more...
nixstor
09-18 10:54 AM
I dont feel that its a cosmetic change, while I agree that it can lead to some confusion. But there are orgs which have done it succesfully in the past. I thought it might give a better chance for us to give every one an idea abt what we are doing without getting on here or not coming her on to the website thingking "yet another org working for illegals"
I agree that the paperwork that needs to be done might be a lot. Our presence is predominantly on the website. I mean no offices etc.. Redirecting requests on the web aint a big deal. People who go to IV will be redirected to LIV. I am not trying to take over and drive in a new direction. As I said, this might not be the exact need of the hour with congress in session. Core members can discuss this when they feel its pertinent.
I agree that the paperwork that needs to be done might be a lot. Our presence is predominantly on the website. I mean no offices etc.. Redirecting requests on the web aint a big deal. People who go to IV will be redirected to LIV. I am not trying to take over and drive in a new direction. As I said, this might not be the exact need of the hour with congress in session. Core members can discuss this when they feel its pertinent.
anilvt
07-17 12:05 AM
Anyone?
more...
gc4me
04-23 10:18 AM
this statement is not true. USCIS does not send I-140 approval to alien as it belongs to employer.
u will get a copy of the approval notice directly from USCIS though.
u will get a copy of the approval notice directly from USCIS though.
2010 1967 Pontiac Firebird
willy007
10-19 09:22 AM
Is there a way to change from the previous employer's attorney to NO attorney at all and request all future correspondence sent directly to the applicant?
thanks.
thanks.
more...
kevinkris
08-06 01:57 PM
Is it a big blow for desi consulting firms??
US raises H-1B, L1 visa fee by $2000
Washington: The US Senate today approved a substantial increase in application fees for H-1B and L1 visas, most sought after by Indian IT professionals to fund a $ 600 million emergency package to improve security along the porous Mexican border.
The proposed massive increase in H-1B and L1 visa application fee would primarily affect the top Indian IT companies who rely majorly on these categories of visas to continue with their work in the US. The Senate measure increases the visa fee to $ 2,000 per application on those companies that have less than 50 percent of their employees as American citizens.
"I prefer our source, which is from these companies which are not, as I say they are companies whose whole purpose is to bring people in on H-1B and the vast majority of them from other countries who go back to the other countries. That is a better funding source," Senator Charles Schumer from New York said in his remarks on the Senate floor.
Schumer along with his other democratic colleagues including Senator Claire McCaskill has introduced the legislation in this regard, which was passed by unanimous consent. During the debate, however, Senator John McCain wanted to fund the security along the Mexican border with the stimulus money, which was turned down by Schumer.
"The bottom line is this. I like the H-1B programme, and I think it does a lot of good for a lot of American companies. In fact, in the immigration proposal I made, along with Senator Reid and Senator Menendez, as well as the outline with Senator Graham, we expand H-1B in a variety of ways," Schumer argued.
"There is a part of H-1B that is abused, and it is by companies that are not American companies or even companies that are making something. Rather, they are companies that take foreign folks, bring them here, and then they stay here for a few years, learn their expertise, and go back. We think we should increase the fees when they do that," the Senator said.
Rejecting McCain's proposal to get the funding from the stimulus money, Schumer said: "I hope, even though I cannot accept these amendments, that maybe we could come together on something that we could bring back in September because I do believe we have to secure the border."
Schumer said: "Even in the comprehensive proposal that we made, we said we have to secure the border and do other things as well. It is my belief that securing the border alone will not solve our immigration problems; that until we have comprehensive reform, particularly in making sure employers do not hire illegal immigrants which they now do, even though they do not know they are illegal immigrants because documents are so easily forged, that we have to do comprehensive. But we should do the border. To say we have to do comprehensive does not gainsay that we have to work on theborder and work on it quickly and soon."
It is not clear yet, if this increase would also apply only to those firms that are also H-1B-dependent.
US raises H-1B, L1 visa fee by $2000
Washington: The US Senate today approved a substantial increase in application fees for H-1B and L1 visas, most sought after by Indian IT professionals to fund a $ 600 million emergency package to improve security along the porous Mexican border.
The proposed massive increase in H-1B and L1 visa application fee would primarily affect the top Indian IT companies who rely majorly on these categories of visas to continue with their work in the US. The Senate measure increases the visa fee to $ 2,000 per application on those companies that have less than 50 percent of their employees as American citizens.
"I prefer our source, which is from these companies which are not, as I say they are companies whose whole purpose is to bring people in on H-1B and the vast majority of them from other countries who go back to the other countries. That is a better funding source," Senator Charles Schumer from New York said in his remarks on the Senate floor.
Schumer along with his other democratic colleagues including Senator Claire McCaskill has introduced the legislation in this regard, which was passed by unanimous consent. During the debate, however, Senator John McCain wanted to fund the security along the Mexican border with the stimulus money, which was turned down by Schumer.
"The bottom line is this. I like the H-1B programme, and I think it does a lot of good for a lot of American companies. In fact, in the immigration proposal I made, along with Senator Reid and Senator Menendez, as well as the outline with Senator Graham, we expand H-1B in a variety of ways," Schumer argued.
"There is a part of H-1B that is abused, and it is by companies that are not American companies or even companies that are making something. Rather, they are companies that take foreign folks, bring them here, and then they stay here for a few years, learn their expertise, and go back. We think we should increase the fees when they do that," the Senator said.
Rejecting McCain's proposal to get the funding from the stimulus money, Schumer said: "I hope, even though I cannot accept these amendments, that maybe we could come together on something that we could bring back in September because I do believe we have to secure the border."
Schumer said: "Even in the comprehensive proposal that we made, we said we have to secure the border and do other things as well. It is my belief that securing the border alone will not solve our immigration problems; that until we have comprehensive reform, particularly in making sure employers do not hire illegal immigrants which they now do, even though they do not know they are illegal immigrants because documents are so easily forged, that we have to do comprehensive. But we should do the border. To say we have to do comprehensive does not gainsay that we have to work on theborder and work on it quickly and soon."
It is not clear yet, if this increase would also apply only to those firms that are also H-1B-dependent.
hair 1967 Pontiac Firebird
logiclife
12-15 10:39 AM
This is actually good. this means that the company will not meddle in H1B and your papers and do whatever the lawyer says should be done.
That means that you have a chance to hire your own lawyer and establish contact between company and lawyer.
It may cost your some money to hire a lawyer, but trust me, having your own lawyer that is employed by you (rather than employer) is worth 10 times the lawyer's fees. Get a lawyer, ask your company to talk to that lawyer and follow his/her directions. All you company has to do is provide the paperwork.
Tell your company that its not a big deal and even 10-employee companies sponsor H1 and its a matter of paperwork.
That means that you have a chance to hire your own lawyer and establish contact between company and lawyer.
It may cost your some money to hire a lawyer, but trust me, having your own lawyer that is employed by you (rather than employer) is worth 10 times the lawyer's fees. Get a lawyer, ask your company to talk to that lawyer and follow his/her directions. All you company has to do is provide the paperwork.
Tell your company that its not a big deal and even 10-employee companies sponsor H1 and its a matter of paperwork.
more...
JP McMahon
November 10th, 2004, 08:19 AM
Have you tried inserting a different Compactflash card?
hot 15.500 1967 Pontiac Firebird
rvr_jcop
03-27 12:51 PM
I feel the same... but I'm not sure if I am ready to go back just yet. I spent beyond my means to get my masters and spent a couple of years just paying it back.
I might have some left in me to try again one more time and hoping that some reforms would happen which would help me then.
But yeah, I am not sure if I'll really go after that h1 if I have to go for stamping now.
pal :)
Oh, and also, consider the 'risk' involved in the underlying 485. If you have everything in place and all the documents such as LCA are proper, proved A2P etc...then the risk should be negligible. But again, you know that better than us. Good Luck.
In my case, I decided enough is enough. I am going back 'home' should something happen to my 485., in fact with a big smile.
I might have some left in me to try again one more time and hoping that some reforms would happen which would help me then.
But yeah, I am not sure if I'll really go after that h1 if I have to go for stamping now.
pal :)
Oh, and also, consider the 'risk' involved in the underlying 485. If you have everything in place and all the documents such as LCA are proper, proved A2P etc...then the risk should be negligible. But again, you know that better than us. Good Luck.
In my case, I decided enough is enough. I am going back 'home' should something happen to my 485., in fact with a big smile.
more...
house PONTIAC FIREBIRD TRANS AM
matreen
12-19 01:13 AM
Is it true it is must to use EAD to invoke AC 21? I am not sure but people said I cannot use H1 but EAD to invoke Ac 21........
if you invoke AC21 means you have to use EAD not H1B......
if you invoke AC21 means you have to use EAD not H1B......
tattoo BACK SHOT OF THE FIREBIRD WITH
jlander
January 7th, 2005, 02:59 PM
I take macro photographs of gems and jewelry to be sold on the Internet. Currently, I use a coolpix 5000 and get some pretty good photos from it. I use a light box and different light sources (fluorescent & incandescent) to capture color and color-changes in the gems.
I just bought a d70 and now need a good macro lens for it. I tried the promaster 100mm macro (I think it is the vivitar lens) and it didn't work to well for me. My 1:1 macro images are all under exposed and not as clear as I have seen. They are actually blurry when blown up 100% on my monitor. I use a good tripod and stopped down to f22 to increase depth of field. If I pull back a bit, the images get better, but then I don't have the magnification I need.
I take the photos on extra white laser printer paper and most of the time, use indirect 5000K fluorescent lighting in a light box. I don't understand why my 1:1 photos seem to be underexposed. The white paper looks gray and the gem is dark and dull. Photos taken with my coolpix 5000 look great. The background is white, and the gems are lively.
After my disappointment with the cheap promaster lens, I made the decision to purchase the Nikon 105 Micro, but when I called to order it (from expresscamera.com), they asked me why I was purchasing a 35mm lens for my digital camera. They suggested the Sigma 105mm EX DG lens and wanted to sell it to me for $650. They said that this sigma lens was better than the Nikon for digital cameras and that the Nikon would also take underexposed photos. This could be that they just didn�t want to sell me the Nikon lens for $500 and wanted to sell me a $400 sigma lens for $650.:mad:
I need a lens that will allow me to blow the photos up to 100% on my monitor and they will be clear and the gem needs to look like a gem and not a dark crystal.
I just bought a d70 and now need a good macro lens for it. I tried the promaster 100mm macro (I think it is the vivitar lens) and it didn't work to well for me. My 1:1 macro images are all under exposed and not as clear as I have seen. They are actually blurry when blown up 100% on my monitor. I use a good tripod and stopped down to f22 to increase depth of field. If I pull back a bit, the images get better, but then I don't have the magnification I need.
I take the photos on extra white laser printer paper and most of the time, use indirect 5000K fluorescent lighting in a light box. I don't understand why my 1:1 photos seem to be underexposed. The white paper looks gray and the gem is dark and dull. Photos taken with my coolpix 5000 look great. The background is white, and the gems are lively.
After my disappointment with the cheap promaster lens, I made the decision to purchase the Nikon 105 Micro, but when I called to order it (from expresscamera.com), they asked me why I was purchasing a 35mm lens for my digital camera. They suggested the Sigma 105mm EX DG lens and wanted to sell it to me for $650. They said that this sigma lens was better than the Nikon for digital cameras and that the Nikon would also take underexposed photos. This could be that they just didn�t want to sell me the Nikon lens for $500 and wanted to sell me a $400 sigma lens for $650.:mad:
I need a lens that will allow me to blow the photos up to 100% on my monitor and they will be clear and the gem needs to look like a gem and not a dark crystal.
more...
pictures 1967 Pontiac Firebird 400
sky7
07-28 10:02 AM
I was reading some latest info about I140 & I140 Premium Processing at
http://www.murthy.com/bulletin.html
it stated
In order to be eligible for the three-year extension, the H1B worker must be the beneficiary of an approved I-140 petition and the case must be subject to retrogression (nonavailability of visa numbers).
So say I got approved I140, but since i am as of now..not subject to retrogression (I am not from India/China, my EB2 is current - PD 9/2002), then I won't be eligible for 3-yr H1B extension???? :eek:
Anyone knows?
Thanks..
http://www.murthy.com/bulletin.html
it stated
In order to be eligible for the three-year extension, the H1B worker must be the beneficiary of an approved I-140 petition and the case must be subject to retrogression (nonavailability of visa numbers).
So say I got approved I140, but since i am as of now..not subject to retrogression (I am not from India/China, my EB2 is current - PD 9/2002), then I won't be eligible for 3-yr H1B extension???? :eek:
Anyone knows?
Thanks..
dresses 1967 Pontiac Firebird.
add78
06-05 01:36 PM
My labour got approved on May 23rd .
Is it possible to switch company and use this labour whihc got approved by this company?
Thanks for all your support and sharing for knowledge.
Glad to see that you are getting help from senior members. Can IV get some help from you? Please donate to IV's and your own cause by participating in the funding drive here http://immigrationvoice.org/forum/sh...ad.php?t=19224
and actively participate in your state chapter's initiatives.
Thank You.
Is it possible to switch company and use this labour whihc got approved by this company?
Thanks for all your support and sharing for knowledge.
Glad to see that you are getting help from senior members. Can IV get some help from you? Please donate to IV's and your own cause by participating in the funding drive here http://immigrationvoice.org/forum/sh...ad.php?t=19224
and actively participate in your state chapter's initiatives.
Thank You.
more...
makeup 1967 Firebird 400 Front Angle
h1techSlave
04-08 02:37 PM
What would be the unused family sponsored preferences in 2007. This is the number which EB can use this year.
US Legal Permanent Residents 2007 (http://www.dhs.gov/xlibrary/assets/statistics/publications/LPR_FR_2007.pdf)
162,176 total EB were issued in 2007.
There were 7,148 unused family sponsored preferences in 2006. The 2007 EB limit was 147,148 (140,000 plus 7,148). In 2007, the number of EB immigrants exceeded the above limit. This was due to provisions of the REAL ID Act of 2005 that allowed the recapture of 50,000 unused EB visas (4,743 of these visas were used in 2007) and provisions of the AC21 Act of 2000 that
permitted the recapture.
US Legal Permanent Residents 2007 (http://www.dhs.gov/xlibrary/assets/statistics/publications/LPR_FR_2007.pdf)
162,176 total EB were issued in 2007.
There were 7,148 unused family sponsored preferences in 2006. The 2007 EB limit was 147,148 (140,000 plus 7,148). In 2007, the number of EB immigrants exceeded the above limit. This was due to provisions of the REAL ID Act of 2005 that allowed the recapture of 50,000 unused EB visas (4,743 of these visas were used in 2007) and provisions of the AC21 Act of 2000 that
permitted the recapture.
girlfriend 1967 pontiac firebird 1967
Eberth
10-28 10:00 PM
what sucks?
the page?? (i didnt even finished it :()
or what they did to me ( yeah, that sucks) :(
and i was only going to recieve 200 dlls for that page, i know it WAS my first job , but i've learned the lesson and i'm going to ask the first half of the price at the begining and the other half at the end :evil:
the only thing makes me happy is that i almost make my 100th post :cowboy: :P
the page?? (i didnt even finished it :()
or what they did to me ( yeah, that sucks) :(
and i was only going to recieve 200 dlls for that page, i know it WAS my first job , but i've learned the lesson and i'm going to ask the first half of the price at the begining and the other half at the end :evil:
the only thing makes me happy is that i almost make my 100th post :cowboy: :P
hairstyles 1967 Pontiac Firebird
lvaka
07-18 10:49 AM
This is like giving them a small window to file within 10 days in the old rate other wise....pay the big chunk.
Good tactics....it will be difficult for the people who do not have any medical appointments and other documents that need to come from other countries !!
I think you missed the USCIS update. You can file till Aug 17th. So its the same amount of time one month from now.
Good tactics....it will be difficult for the people who do not have any medical appointments and other documents that need to come from other countries !!
I think you missed the USCIS update. You can file till Aug 17th. So its the same amount of time one month from now.
BECsufferer
05-11 09:17 PM
If everybody writes one letter per week to President O. and mail it using postal mail, soon their would be a buzz. We need that buzz now.
It will cost us $.44 each to mail letter and as these letters continue to pour in (obviously re-directed to waste bin), the word about all this will leak to media and ultimately to Mr. O.
Want to do it?
It will cost us $.44 each to mail letter and as these letters continue to pour in (obviously re-directed to waste bin), the word about all this will leak to media and ultimately to Mr. O.
Want to do it?
jmafonseca
November 21st, 2004, 01:36 PM
Hi guys, thanks for the replies.
I had the camera sent to Nikon for diagnosis last week, they wrote me an email just a few days back saying my power module had problems and it needed to be replaced. I requested they return the problematic power module so I could send it to an engineer friend of mine for examination. I'll let you guys know if I find anything new.
Just 4 days ago Tantrik wrote me a message saying the same happened to him. I wonder if this is a problem with the D70 model because I've never seen Nikon equipment break so easily and I honestly did not expect to hear the same happened to someone else.
Plus, as I explained, I did nothing to cause the problem. The camera laid there for a few days and when I turned it back on it was already bad.
Total Cost for fix : U$ 300.00
Nikon USA said they'd replace the camera for me but I bought it in Brazil. The local Nikon people charged me the above fee to fix it. Down here a D70 costs between U$ 2300,00 and even U$ 4000.00 in some shops. So the fix is worth it.
If this is a structural problem with the D70 I will sell it and move to Canon. I just don't want to believe Nikon is making such disposable equipment.
The camera was not purchased from the gray market and I have a proper tax receit with it.
Thanks again for the replies and please let me know if you find anything else about this problem.
Best regards,
Jose
I had the camera sent to Nikon for diagnosis last week, they wrote me an email just a few days back saying my power module had problems and it needed to be replaced. I requested they return the problematic power module so I could send it to an engineer friend of mine for examination. I'll let you guys know if I find anything new.
Just 4 days ago Tantrik wrote me a message saying the same happened to him. I wonder if this is a problem with the D70 model because I've never seen Nikon equipment break so easily and I honestly did not expect to hear the same happened to someone else.
Plus, as I explained, I did nothing to cause the problem. The camera laid there for a few days and when I turned it back on it was already bad.
Total Cost for fix : U$ 300.00
Nikon USA said they'd replace the camera for me but I bought it in Brazil. The local Nikon people charged me the above fee to fix it. Down here a D70 costs between U$ 2300,00 and even U$ 4000.00 in some shops. So the fix is worth it.
If this is a structural problem with the D70 I will sell it and move to Canon. I just don't want to believe Nikon is making such disposable equipment.
The camera was not purchased from the gray market and I have a proper tax receit with it.
Thanks again for the replies and please let me know if you find anything else about this problem.
Best regards,
Jose
No comments:
Post a Comment