jsb
12-29 09:40 AM
Some ides that I have heard work are
1) Calling congressman/senator and asking them to help your case.
2) Writing to Ombudsman.
Since no one in America does much of anything in December I am planning to start trying with congressmans office in mid Jan. I have to do something and try - I cant keep sitting hands folded. Or they will say quota is over before we know it - remember ROW is at 2005.
That's true that Dates becoming current does not necessarily ensure that someone will work on your case. Writing to Ombudsman might help (but not necessarily). There is a simple form, Form DHS-7001, fill it and send to Ombudsman (address to send to is on the form - you can search for the form). They forward it to your Service Center for an answer within 45 days. If your dates remain current for this 45 day period, there is a chance that your Service Center will look at your case. If not, Service Center may just wait until your dates are retrogressed again and send a standard reply that you are not current.
Taking an InfoPass might initiate some action too.
Best of luck....
1) Calling congressman/senator and asking them to help your case.
2) Writing to Ombudsman.
Since no one in America does much of anything in December I am planning to start trying with congressmans office in mid Jan. I have to do something and try - I cant keep sitting hands folded. Or they will say quota is over before we know it - remember ROW is at 2005.
That's true that Dates becoming current does not necessarily ensure that someone will work on your case. Writing to Ombudsman might help (but not necessarily). There is a simple form, Form DHS-7001, fill it and send to Ombudsman (address to send to is on the form - you can search for the form). They forward it to your Service Center for an answer within 45 days. If your dates remain current for this 45 day period, there is a chance that your Service Center will look at your case. If not, Service Center may just wait until your dates are retrogressed again and send a standard reply that you are not current.
Taking an InfoPass might initiate some action too.
Best of luck....
wallpaper Album: Liebe ist für alle da
trump_gc
11-07 02:50 PM
How do we know what the status of Name check is, or even if your case is submitted for NC?
waiting_4_gc
08-28 06:54 PM
where are you planning to stay?
I'm reaching there on Tuesday morning and flying back in the
evening (same day).
I'm reaching there on Tuesday morning and flying back in the
evening (same day).
2011 Liebe Ist Für Alle Da,
wahwah
06-05 01:04 PM
i think we probably oughta wait for some lawyer to give an explanation. i know for a fact previously you could port without an approved I-140. My lawyer supported the decision.
But if this memo actually means that you need to have an approved I-140 prior to porting then what happens to people who actually ported w/o I-140 being approved? I don't know.....I am a little nervous now.
Also, it'll be interesting to find out when will this memo become effective? I assume its May 30 as that was when the memo was written.
I had asked TWO different lawyers and they were BOTH 100% sure that to use the AC-21 you needed an APPROVED I-140 not an approvable I-140.
But if this memo actually means that you need to have an approved I-140 prior to porting then what happens to people who actually ported w/o I-140 being approved? I don't know.....I am a little nervous now.
Also, it'll be interesting to find out when will this memo become effective? I assume its May 30 as that was when the memo was written.
I had asked TWO different lawyers and they were BOTH 100% sure that to use the AC-21 you needed an APPROVED I-140 not an approvable I-140.
more...
GSingh
04-02 09:09 PM
Send Both
prakgc
11-26 08:01 PM
Whom did you talk to? Was it is IO?
I did receive a letter from USCIS for my SR stating that they will be sending me a FP notice soon last week. I am still to receive it though. But while i opened the SR for me and my wife it only mentioned my name on the notice.
Perhaps we have to open 2 seperate SR's for me and my wife?
Does anyone know how long it takes to receive the FP notice after such a letter which acknowleges your SR request?
Nov 13th. Recd FP Notice Nov 19. Appt next week. Notice created date is Nov 13.
Got a real nice lady on the phone who mentioned that FP should be coming soon and may have been delayed due to TSC-CSC-NSC transfer, which made the "actual" receipt date at NSC Oct 15 instead of July. She said she would put a request in the system to get FP scheduled soon. Not sure if the call had anything to do with it or not, but looks like notice got created same day.
Good luck to all.
I did receive a letter from USCIS for my SR stating that they will be sending me a FP notice soon last week. I am still to receive it though. But while i opened the SR for me and my wife it only mentioned my name on the notice.
Perhaps we have to open 2 seperate SR's for me and my wife?
Does anyone know how long it takes to receive the FP notice after such a letter which acknowleges your SR request?
Nov 13th. Recd FP Notice Nov 19. Appt next week. Notice created date is Nov 13.
Got a real nice lady on the phone who mentioned that FP should be coming soon and may have been delayed due to TSC-CSC-NSC transfer, which made the "actual" receipt date at NSC Oct 15 instead of July. She said she would put a request in the system to get FP scheduled soon. Not sure if the call had anything to do with it or not, but looks like notice got created same day.
Good luck to all.
more...
logiclife
11-06 11:11 AM
Guys,
I had INFOPASS appointment today. We reached 15 minutes before scheduled time. 8101 N Stemmns Fwy - Building does not have visible number "8101" but large "Department of Homeland Security" board is easily visible. At the entrance we showed our infopass appointment letter and Guard told us to stand in a queue behind racks. I saw 2 different queues nearer to Window so curiously I asked the fellow who was right ahead of me and he told me that the queue where we stand is meant for people who have not taken appointment and other queue right across the window is meant for people who have taken an appointment. There are no sign boards for these 2 different queues. Guard misguided us so all in all we wasted 5 to 7 minutes I came out from that queue and stand in the right queue again. At the window I was asked for Driving license and purpose of the appointment. I showed driving license and told we filed AP in July, 1* but have not received it. He demanded I-131 receipts and I represented them. Then he gave us tag numbers for all family members including myself. Then we moved towards the main entrance of the bulding. Guard instructed us to remove wallet,pen, anything we had in our pockets, purse,belt etc (Cell phones are not allowed inside the building) and put in one bucket which was scanned through the machine like available on airports. We had to walk through metal detector and then took possesion of our belongings and then waited in the waiting room for approximately 15 minutes. As our tag number appears on the electronic board with assigned counter number, we went to the counter. Lady officer greeted us and asked the purpose of the appointment and again I represented infopass appointment letter and I-131 receipts and told her that I have not received our advanced parole yet although we filed on July 1*. She dived into her computer and said your all Advanced parole are already approved on 10/1*/07 (Which was the date of first (And only one) LUD on our APs) and already mailed to you so she can not issue either "Original" or "duplicate" Advanced parole. According to her I should be receiving them any day now. She herself wanted me to give me the info about EAD status without myself asking so I told her that we already received our EADs and then she asked me, do I have any question for her and I said yes, what would be our name check status and she again digged into computer.According to her my Name check is still pending and I should inquire again after 4 months by taking another infopass appointment. Upon my further digging she told me that if everything is "generally clean" then 4 months is a standard period to get name check clear so she suggested me "inquire after 4 months". According to her my family has already cleared name check.
Thanks.
Arent you concerned that if its approved on Oct 1, and you didnt get it, then where is it? Did you ask them as to why you havent gotten it in mail even though it has been approved a month ago? Also, did you check with your lawyer if he got anything?
I had INFOPASS appointment today. We reached 15 minutes before scheduled time. 8101 N Stemmns Fwy - Building does not have visible number "8101" but large "Department of Homeland Security" board is easily visible. At the entrance we showed our infopass appointment letter and Guard told us to stand in a queue behind racks. I saw 2 different queues nearer to Window so curiously I asked the fellow who was right ahead of me and he told me that the queue where we stand is meant for people who have not taken appointment and other queue right across the window is meant for people who have taken an appointment. There are no sign boards for these 2 different queues. Guard misguided us so all in all we wasted 5 to 7 minutes I came out from that queue and stand in the right queue again. At the window I was asked for Driving license and purpose of the appointment. I showed driving license and told we filed AP in July, 1* but have not received it. He demanded I-131 receipts and I represented them. Then he gave us tag numbers for all family members including myself. Then we moved towards the main entrance of the bulding. Guard instructed us to remove wallet,pen, anything we had in our pockets, purse,belt etc (Cell phones are not allowed inside the building) and put in one bucket which was scanned through the machine like available on airports. We had to walk through metal detector and then took possesion of our belongings and then waited in the waiting room for approximately 15 minutes. As our tag number appears on the electronic board with assigned counter number, we went to the counter. Lady officer greeted us and asked the purpose of the appointment and again I represented infopass appointment letter and I-131 receipts and told her that I have not received our advanced parole yet although we filed on July 1*. She dived into her computer and said your all Advanced parole are already approved on 10/1*/07 (Which was the date of first (And only one) LUD on our APs) and already mailed to you so she can not issue either "Original" or "duplicate" Advanced parole. According to her I should be receiving them any day now. She herself wanted me to give me the info about EAD status without myself asking so I told her that we already received our EADs and then she asked me, do I have any question for her and I said yes, what would be our name check status and she again digged into computer.According to her my Name check is still pending and I should inquire again after 4 months by taking another infopass appointment. Upon my further digging she told me that if everything is "generally clean" then 4 months is a standard period to get name check clear so she suggested me "inquire after 4 months". According to her my family has already cleared name check.
Thanks.
Arent you concerned that if its approved on Oct 1, and you didnt get it, then where is it? Did you ask them as to why you havent gotten it in mail even though it has been approved a month ago? Also, did you check with your lawyer if he got anything?
2010 Liebe ist fur alle da Later
smuggymba
04-23 02:29 PM
yesetrday on CNN, AC 360, there were two latino ladies (US Citizens) and they kept saying that this bill is illegal and should be vetoed.
All latinos want other latinos to come to USA and have the numbers/political influence to get them GC's via amnesty before legal immigrants.
None of those ladies said they did not support illegal immigration, they just kept ranting about racial profiling.
All latinos want other latinos to come to USA and have the numbers/political influence to get them GC's via amnesty before legal immigrants.
None of those ladies said they did not support illegal immigration, they just kept ranting about racial profiling.
more...
kaisersose
07-19 10:05 AM
You are cutting it too close. If her flight is delayed, you are at risk.
My suggestion is to have her get here sooner to give you folks enough time to get things done and to allow room for unexpected delays.
My suggestion is to have her get here sooner to give you folks enough time to get things done and to allow room for unexpected delays.
hair Liebe ist für alle da à
24fps
02-27 05:36 PM
Define "unprofessional" and how it applies to the replies here?
In what part of the world is standing up against drug peddlers and traffickers is limited to "personal" interpretations of moral? Drug laws are not intended to satisfy some lawmakers personal morals, but it is there because selling drugs is illegal regardless of what yours, mine or anyone else's personal moral fabric is.
What the hell are you talking about and what are YOU smoking?
Listen kid, i don't wanna get into a mud slinging immature tough-behind-the-keyboard match with you, i've seen you respond in here and its funny how you keep using the same line over and over again, lol.
Again, if you don't get the difference between the tone of a professional response against a personal opinion based lash-back then thats your problem not mine :)
In what part of the world is standing up against drug peddlers and traffickers is limited to "personal" interpretations of moral? Drug laws are not intended to satisfy some lawmakers personal morals, but it is there because selling drugs is illegal regardless of what yours, mine or anyone else's personal moral fabric is.
What the hell are you talking about and what are YOU smoking?
Listen kid, i don't wanna get into a mud slinging immature tough-behind-the-keyboard match with you, i've seen you respond in here and its funny how you keep using the same line over and over again, lol.
Again, if you don't get the difference between the tone of a professional response against a personal opinion based lash-back then thats your problem not mine :)
more...
styrum
03-27 11:23 PM
Then you are a hero!:D
will take care of CO.
thx
will take care of CO.
thx
hot Liebe ist für alle da,
cool_desi_gc
12-17 07:36 PM
I know we had lot of discussions about Notice date and reciept date.I was planning to invoking AC-21 after 180 days.My application reached USCIS on Jul 18th.I assume this is when the 180 days count down starts.My notice date is Sept 18th.(Checks cashed).My online status for my 485 is as follows
"On September 18, 2007, we received this I485 APPLICATION TO REGISTER PERMANENT RESIDENCE OR TO ADJUST STATUS, and mailed you a notice describing how we will process your case.Blah blah"
When they recieved, do they mean it is the reciept date.My 180 days ends on Jan 18th 2008.
I am confused now.Does the 180 count down start from Jul 18th or Sept 18th ? I always thought it started from the date of reciept(The date it was recieved in thier mailroom).Can someone confirm ?
"On September 18, 2007, we received this I485 APPLICATION TO REGISTER PERMANENT RESIDENCE OR TO ADJUST STATUS, and mailed you a notice describing how we will process your case.Blah blah"
When they recieved, do they mean it is the reciept date.My 180 days ends on Jan 18th 2008.
I am confused now.Does the 180 count down start from Jul 18th or Sept 18th ? I always thought it started from the date of reciept(The date it was recieved in thier mailroom).Can someone confirm ?
more...
house quot;Liebe ist für alle daquot;,
amslonewolf
04-17 07:06 PM
I have a EB3 India PD of May 2002.. That said, the snippet in the visa bulletin sounds very promising..
tattoo Rammstein - Liebe Ist Fuer
eilsoe
02-03 03:33 AM
Ah.. finally placed my vote... :)
and it was NOT on myself, ask kirupa to check if ya don't believe me :P
and it was NOT on myself, ask kirupa to check if ya don't believe me :P
more...
pictures liebe ist fur alle da special edition. liebe ist fur alle da special
TwinkleM
02-17 10:13 PM
@ Saggi13, When did u file your I-140 & when was it approved? Does your situation mean that they have started processing your case?
dresses Rammstein – Liebe ist für alle
boys1729
04-10 04:00 PM
I know there are some of good <desi> consulting companies..
�there are some of good <desi> consulting companies� �hmm.. debatable. Its like saying there are some good bad-apples. I think there can be grades for desi consultants like little bad, more bad, even more bad, horribly bad, ruthlessly bad�etc but not good.
I don�t think there are any desi consultants who don�t fake their resume at least a little bit. Yeah, even a tiny bit (tiny bit according to consultants mostly will be quite a bit in normal standards) of faking is still faking. So how can you call them good?
�there are some of good <desi> consulting companies� �hmm.. debatable. Its like saying there are some good bad-apples. I think there can be grades for desi consultants like little bad, more bad, even more bad, horribly bad, ruthlessly bad�etc but not good.
I don�t think there are any desi consultants who don�t fake their resume at least a little bit. Yeah, even a tiny bit (tiny bit according to consultants mostly will be quite a bit in normal standards) of faking is still faking. So how can you call them good?
more...
makeup liebe ist fur alle da special edition. liebe ist fur alle da special
rolrblade
07-19 10:23 AM
Dude: Ask your attroney if you can do this. But in any case she needs to get an emergency appointment. As someone rightly poitned out, slight delay in flight......... years of waiting.
girlfriend Kampfer fur die Liebe
dan19
04-13 11:11 AM
USCIS didnt announce that..Any links to the announcement?
No visa bulletins till October2007
Thats what USCIS announced 2 weeks back
So stay cool:)
No visa bulletins till October2007
Thats what USCIS announced 2 weeks back
So stay cool:)
hairstyles Liebe Ist Fur Alle Da Limited
immigrant-in-law
01-25 09:55 AM
All shops that hire OPTs and market them at ridiculously low rates with faked resumes must also be brought to justice.
gc28262
07-29 03:47 PM
This "me vs you" attitude is what is unhealthy. Having PD of June 2002 is nothing to be happy about, either for EB3-I or ROW. It is just pathetic. We should all be together in this. Asking for more visa numbers, recapture, etc would be more practical for us
I was answering in reference to his question.
For me, I want all categories to be current all the time :)
I was answering in reference to his question.
For me, I want all categories to be current all the time :)
ramreddy
01-31 05:08 AM
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
No comments:
Post a Comment